Instructions For Use - Otto Bock 5R9 Instructions For Use Manual

CAUTION
Exceeding the service life
Risk of injury due to change in or loss of functionality and damage to
the product
► Ensure that the approved service life is not exceeded.
CAUTION
Use under unallowable environmental conditions
Risk of injury due to damage to the product
► Do not expose the product to unallowable environmental condi­
tions.
► If the product has been exposed to unallowable environmental
conditions, check it for damage.
► If damage is apparent or in case of doubt, do not continue using
the product.
► Take suitable measures if required (e.g. cleaning, repair,
replacement, inspection by the manufacturer or a specialist
workshop etc.).
CAUTION
Reuse on another patient
Risk of injury due to loss of functionality as well as damage to the
product
► Only use the product for a single patient.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readi­
ness for use.
► In case of changes in or loss of functionality, do not continue
using the product (see "Signs of changes in or loss of functional­
ity during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspec­
tion by the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.
4 Scope of delivery
see fig. 1, Quant­
item ity
– 1
1 1
2 1
– 4
see fig. 1, Quant­
item ity
– 1
3 1
– 4
5 Preparing the product for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
5R9
Designation Reference

Instructions for use

Socket attachment
block
Lamination dummy
Countersunk head 501S41=M5x1­
screw
4R60
Designation Reference
Instructions for use
Socket adapter
Set screw 506G3=M6X10
number
–
5R9
4X8
6
number
–
4R60
9