Chapter 2 Introduction; Preparing For Installation; Recommendations - Raven AutoBoom Case IH Patriot 250 Installation Manual

80'-100' booms
Table of Contents

Advertisement

CHAPTER
2
Congratulations on your purchase of the Raven AutoBoom system! This system is designed to provide automated
boom height adjustment for agricultural equipment.
This manual applies to the following machines. For future reference, write your serial number in the space below.
MAKE: Case IH
MODEL: Patriot 250/2240/2250
MAKE: New Holland
MODEL: SP2500
FIGURE 1. Case IH Patriot 250

PREPARING FOR INSTALLATION

Before installing AutoBoom, park the machine where the ground is level, clean, and dry. Leave the machine
turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.

RECOMMENDATIONS

Raven Industries recommends the following best practices before installing or operating the AutoBoom system for
the first time, at the start of the season, or when moving the AutoBoom system to another machine:
• Ensure the machine's hydraulic filters have been recently changed and there are no issues with the machine's
hydraulic system (e.g., pump issues, faulty hydraulic motors, fine metal deposits in the hydraulic hoses, etc.).
P/N 016-0230-047 Rev. C
I NTRODUCTION
C H A P T E R 2
5

Advertisement

Table of Contents
loading

Table of Contents