Connecting The Planetary Gearbox's Axial-Piston Motor To The Hydraulic System - Bosch Rexroth 40 Series Operating Instructions Manual

32/64 Assembly
Bosch Rexroth AG, MOBILEX GFB 8000 series 40 general operating instructions, RE 79039-01-B/01.2021
8 Tighten the means of attachment without lifting the planetary gearbox.
9 Make sure that the part of the machine or chassis frame to which the planetary
gearbox is to be mounted is free of dirt and foreign objects.
10 Lift the planetary gearbox into the machine or chassis frame.
11 Attach the planetary gearbox to the machine or chassis frame. For the required
strength class of the mounting screws as well as the necessary tightening
torques is the machine or vehicle manufacturer liable. The required mounting
screws are not included within the scope of supply.
12 Remove all means of attachment, transport and lifting equipment.
13 Connect all power units and mounting parts required for operation of the
planetary gearbox. For this, observe the instructions in chapter 7 "Assembly".
7.5.6 Connecting the planetary gearbox's axial-piston motor to the hydraulic
system
The machine or vehicle manufacturer is responsible for laying the lines. The axial-
piston motor or the static multiple-disk parking brake (parking brake) has to be
connected to the hydraulic system according to the machine or vehicle
manufacturer's hydraulic diagram.
Failure or damage to the planetary gearbox!
Operation of the axial-piston motor without reading the general operating
instructions of the axial-piston motor first or observing the hydraulic circuit
diagram of the machine or vehicle manufacturer may cause damage to the axial-
piston motor/planetary gearbox/machine or vehicle!
For installation of the axial-piston motor, please refer to the general operating

instructions in chapter C "Mounting parts" of the material number-specific
operating instructions.
Observe the hydraulic circuit diagram of the machine or vehicle manufacturer.

CAUTION