RGBlink. If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
TAO 1pro is a new generation of portable product developed by RGBlink for live streaming. TAO 1pro has two USB 3.0 inputs connecting with cameras,two HDMI 1.3 input and one HDMI 2.0 output; Besides,audio input supports MIC and Line input,audio delay and audio mixing are also added;TAO 1pro also supports touching control on the 5.5 inch screen supporting up to 1920*1080 resolution.
2.2 Connecting Input Signal Source You can use any camera, computer or other HDMI/USB 3.0 device as the input source of the TAO 1pro. You can see the resolution of the input signal on the 5.5 inch touch screen when there is active signal plug in.
2.4 Connecting Network On the left panel of TAO 1pro,there is a LAN port which can be connected to the router via CAT6 cable for live streaming.(Details refers to <3.4 Streaming>) 2.5 Connecting Microphone and External Monitoring Devices On the left panel of TAO 1pro,there is two 3.5mm standard interface which can be directly connected to the microphone or wireless MIC.You can also use external speakers or headphones to monitor the main output audio...
Chapter 3 Use Your Product 3.1 Menu There is a 5.5 inch touch screen on TAO 1pro front board, whose resolution is up to 1920*1080.Most operation can be done on the screen, so let’s see this touch screen first. Top Menu Bar...
3.2 Input Signal Signal Switch TAO 1pro supports signal switching in whether in preview,record or live streaming. Gently touch【HDMI 1】in the top menu bar,signal seamless switching can be achieved in the left signal bar. Yellow icon indicates PVW,red icon indicates PGM,green icon indicates input signals,gray icon indicates no input signal.When you click a green one,then the input signal will be switch to PVW;click a yellow one,the input signal will...
3.5 NDI TAO 1pro supports NDI 5.0 and transmit data in H.264/H.265/RGBA/YUV442 format.In NDI network,TAO 1pro can convert video data from other channels (such as IP video streaming, HDMI, etc.) into NDI format and send it to the receiver. 1.I the【Settings】menu,turn ON【NDI】,and the Event Settings icon will turn into NDI icon 2.Click the icon...
3.6 Record TAO 1pro support recording whenever in signal preview,switch and streaming. 1. Plug mobile harddisk(storage up to 2T) or USB storage to TAO 1pro USB 2.0 port(supported record format is MP4) 2. Click【REC】in the bottom menu,you can check the recorded files and information.The list of recorded files will be automatically arranged according to the time.The latest files will be automatically placed in the first row.
Full Screen:If you does not operate for 10 seconds or click the blank area,TAO 1pro will turn to full screen. 3.11 Upgrade Tool: USB disk(including the firmware) Upgrade Steps: 1. Power on the device and plug the USB disk to the USB 2.0 interface,select the version you need and click 【Upgrade】directly.
3.12 Battery Installation TAO 1pro supports power supply via Type C cable as well as two batteries. Install: press the lock button first and put the batteries into the slots until it is locked in the correct position. Remove: press lock button first and remove the batteries.
Page 39
All information herein is Xiamen RGBlink Science & Technology Co Ltd. excepting noted. is a registered trademark of Xiamen RGBlink Science & Technology Co Ltd.While all efforts are made for accuracy at time of print ing, we reserve the right to alter otherwise make change without notice.
Need help?
Do you have a question about the TAO 1pro and is the answer not in the manual?
Questions and answers