RGBlink GX4 User Manual page 18

3. VGA ADJUST
Non-standard VGA input signal can cause the input image shifting or not in full screen, therefore, users need to adjust
VGA input as follows:
After selecting <AUTO AJUST> the device will automatically adjust the H POS,V POS, CLOCK and PHASE to make input
image no shifting and full screen.
Note:If one <AUTO AJUST> cannot meet the needs, users can do <AUTO AJUST> many times. The system can
automatically save the ADJUST parameter. Users can also go to <AUTO AJUST> by pressing 【VGA】button for 10s.
4. ADC ADJUST
AUTO ADUST：YES <OK>,NO <MENU>
RESET：YES <OK>,NO <MENU>
5. SDI ADJUT
GX4 with SDI optional module come with SDI ADJUST in the menu.
6. EDID MANAGE
DESTINATION: DVI or HDMI
SOURCE: RGB DVI, RGB HDMI, FOLLOW, CUSTOM
CUSTOM EDID
Customize resolution for EDID
7.VGA TYPE
Choose signal type for VGA button. VGA or YPbPr.
8.DVI4In1 DVI 4 In 1)
GX4 with optional DVI module installed comes with such signal types as VGA, DVI, CVBS, YPbPr. It is offered to users to
choose the signal type through the DVI connector which is compatible with VGA, DVI, CVBS, YPbPr via adapter.
GX4 User Manual
H POS
V POS
CLOCK
PHASE
>AUTO ADJUST
>AUTO ADJUST
>AUTO ADJUST
RESET
H POS
V POS
ANTI ALIAS
RESET
DESTINATION
SOURCE
CUSTOMIZE:
>1920x1080@60
0
0
0
0
>>
>>
127
127
STEP_0
HDMI
RGB DVI
18