Use The Menu; Led Configuration - RGBlink GX4 User Manual

3.3 Use the Menu

Use the menu system for convenient and intuitive operation. GX4 TST display shows the menu items. The TST display will
show the default state when the menu is not in use, or the operation has timed out. Using the 【MENU】 button and
rotary knob in the front panel, the TST display will show the corresponding menus according to user selections.

3.3.1 LED Configuration

GX4 is installed with Subito™ Quatro Sender Mdoule or other univeral sender card can set Led Configuration in the Menu.
Here is the led configuration sub-menu.
1. QUICK CONNECT
1.1 SEND CARD SET
X,Y : the horizontal and vertical position of the
display that the Sender card control the
on LED scressn
One port of Subito Sender can control
650K pixels. If a LED screen is under 650K pixels
X,Y can be 0.
X maximum 1920
Y maximum 1080
SAVE SENDER CARD: save the X,Y setting to sender card.
RESET SEND CARD: reset sender card if parameters set above is not proper.
1.2 RECEIVE CARD SET
CHOOSE CABLE:choose the output LAN port on the
Sender. There are 4 ports available.
HORIZONTAL CARD: how many receive cards needed
to receive the data that the chosen sender
port offer
WIDTH: width of each led cabinet
HEIGHT:height of each led cabinet
GX4 User Manual
>QUICK CONNECT
CUSTOM CONNECT
ADVANCED
CONFIG FILE
>SEND CARD SET
RECEIVE CARD SET
RESET ALL CARD
>X
Y
SAVE SENDER CARD
RESET SENDCARD
>CHOOSE CABLE
HORIZONTAL CARD
VERTICAL CARD
WIDTH
HEIGHT
>HOR OFFSET
VER OFFSET
CONNECT TYPE
>>
>>
>>
>>
>>
>>
1
1
3
128
192
0
0
>>
15