Load Led Configuration File - RGBlink GX4 User Manual

6.2 Load LED Configuration File

For GX4 installed with Subito Quatro Sender Module or other universal sender card, user can upload LED manufacturer'
bin file to set the LED screen parameter.
1.Prepare LED configuration file provided by the manufacturer and store it in somewhere easy to find on your computer
or USB disk.
2.Download and install XTOOL V1.0.1.3. Download XTOOL from RGBLink www.rgblink.com/support#downloads
3.Connect GX4 and computer with the USB cable (USB A-B cable) from In The Box.
4.Open up XTOOL
If you find it in Chinese, switch the language by clicking this
5.Set Connection
Click connection icon , select Serial Comm and Confirm.
When it is done, a window will pop up showing "Serial port set" and the Device Type and SN (serial number) can be
GX4 User Manual 35