Chapter 2 Install Your Product; Plug In Signals; Plug In Main Power; Turn On Your Product - RGBlink GX4 User Manual

Chapter 2 Install Your Product

2.1 Plug in Signals

Connect signals to the product (ensure all devices are powered off first). Tighten connector screws/locks where provided.

2.2 Plug in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.

2.3 Turn on Your Product

Turn the power switch on the rear to ON position.
TST screen shows as below，meanwhile the device enter initializing state after that，the device will load the previously
saved setting. On delivery, the default input is HDMI.
GX4 User Manual
INPUT HDMI：NO INPUT
SV: 2.00 SN：1043
OUTPUT FORMAT：1920×1080@60
13