Scale】Button; Save】Button - RGBlink GX4 User Manual

SWAP IMAGE：
Select on or off to switch the main picture and secondary picture (the small one).
ALPHA:
Image transparency setting, the adjustment range is 0 to 16.
SECLECT：
Select IMAGE A or IMAGE B.
3.4.3【SCALE】Button
To scale the output image, users can press 【SCALE】
numeral buttons.
After user press 【SCALE】, LCD shows the menu items as follows:
H SIZE: set the horizontal pixels of output image
V SIZE: set the vertical pixels of output image
H POS: set the horizontal position of image
V POS: set the horizontal position of image
RESET: If operation is not proper, turn knob to <RESET> and start over.
3.4.4【SAVE】Button
Push the [SAVE] button, the button light is on, and enable the SAVE function.
LCD shows [SAVE] instruction info to assist users complete operation. Meanwhile, part of numeral buttons 0~9 lights are
on and parts flash.. Buttons with lights on are empty, flashing buttons are used. LCD shows as below
Saving to flashing positions will overwrite previously saved settings. For example, button 1 is flashing, after pressing
button 1, LCD shows
GX4 User Manual
Save 1 used, overwrite
Yes<OK>, NO <MENU>
button and set the parameters by turning knob or pressing
H SIZE
V SIZE
H POS
V POS
SAVE TO
>SAVE1
KEY ON FOR EMPTY
FLASH IS FOR USED
1920
1080
0
0
27