Shortcut Buttons; Take】Button; Pip】Button - RGBlink GX4 User Manual

3.4 Shortcut Buttons

GX4 comes with shortcut buttons to enter the sub-menu of certain features. Here are details of some quick buttons.
3.4.1【TAKE】Button
When GX4 power on, system default HDMI input signal.
To switch signal, press CVBS,VGA,DVI or SDI. For example, to switch to CVBS, push【VGA】
flashes.
TAKE MODE allow users to switch inputs with transition effect
To EnableTAKE mode , Keep pressing
The LCD sreen shows the info below for 2S
And then go back to the main interface .If user want to switch to DVI signal, push【DVI】
Then push TAKE button again. VGA signal will be switched to LED screen with set transition effect.
3.4.2【PIP】Button
PIP mode cann't be enabled unless TAKE MODE is OFF.
Push button and button light is on. LCD shows the <PIP> menu.
LAYOUT：
There are 7 layouts available in the menu. PIP L+T, PIP R+T, PIP L+B, PIP R+B, PIP CENTER, PBP L+R and PBP T+B.
Here are 3 examples:
PIP L+T PBP L+R
GX4 User Manual
button for 3s and the TAKE MODE is ON.
PIP
LAYOUT
SWAP PICTURE
ALPHA
>SELECT
PBP T+B
button and the button
TAKE MODE ON
AUDIO INVALID
button
IMAGE B
ON
PIP L+B
ON
0
26