RGBlink GX4 User Manual page 40

both telecommunication and data communications applications.
●optical fiber connector:
disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can
pass. 4 most common types of optical fiber connectors are SC, FC, LC,ST.
●SC:(Subscriber Connector), also known as the square connector was also created by the Japanese company
– Nippon Telegraph and Telephone. SC is a push-pull coupling type of connector and has a 2.5mm diameter.
Nowadays, it is used mostly in single mode fiber optic patch cords, analog, GBIC, and CATV. SC is one of the
most popular options, as its simplicity in design comes along with great durability and affordable prices.
● LC：(Lucent Connector) is a small factor connector (uses only a 1.25mm ferrule diameter) that has a snap
coupling mechanism. Because of its small dimensions, it is the perfect fit for high-density connections, XFP,
SFP, and SFP+ transceivers.
● FC :(Ferrule Connector) is a screw type connector with a 2.5mm ferrule. FC is a round shaped threaded fiber
optic connector,mostly used on Datacom, telecom, measurement equipment, single-mode laser.
● ST: (Straight Tip) was invented by AT&T and uses a bayonet mount along with a long spring-loaded ferrule
to support the fiber.
● USB: Universal Serial Bus is a standard that was developed in the mid-1990s that defines cables,
connectors and communication protocols. This technology is designed to allow a connection, communication
and power supply for peripheral devices and computers.
● USB 1.1: Full–Bandwidth USB, specification was the first release to be widely adopted by the consumer
market. This specification allowed for a maximum bandwidth of 12Mbps.
●USB 2.0:or Hi–Speed USB, specification made many improvements over USB 1.1. The main improvement
was an increase in bandwidth to a maximum of 480Mbps.
● USB 3.2: Super Speed USB with 3 varieties of 3.2 Gen 1(original name USB 3.0), 3.2Gen 2(original name
USB 3.1), 3.2 Gen 2x2 (original name USB 3.2) with speed up to 5Gbps,10Gbps,20Gbps respectively.
USB version and connectors figure:
Type A
USB 2.0
USB 3.0
USB 3.1&3.2
GX4 User Manual
terminates the end of an optical fiber, and enables quicker connection and
Type B Mini A Mini
B
Micro-A Micro-B Type C
40