Table of Contents
Advertisement
Chapter 9: Servicing the PA300-CN
Reinstalling the Control Pad
To reinstall the control pad in the vehicle:
1.
Reconnect the cables and wiring to the control pad.
2.
See Figure 9.2 on page 46. Secure the rear mounting bracket to the control pad base with the two
Phillips #6-32 x 1/4" screws.
3.
See Figure 9.1 on page 46. Secure the rear mounting bracket to the mounting surface bracket with
the two 1/4" external-tooth lock washers and 1/4-20 x 3/4" hinge screws.)
Getting Technical Support and Service
Federal Signal Corporation will service your equipment or provide technical assistance with any problems
that cannot be handled locally. Any product returned to Federal Signal for service, inspection, or repair must
be accompanied by a Return Material Authorization number. The RMA number can be obtained from your
local distributor or Federal Signal. Please provide a brief explanation of the service requested or the nature of
the malfunction. Contact your local dealer/distributor for replacement parts availability or contact the Federal
Signal Service Department (7 a.m. to 5 p.m., Monday through Friday, Central Time) at:
Service Department
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60484-3167
800-433-9132
800-343-9706 (fax)
www.fedsig.com
Ordering Replacement Parts
See Table 9.2 below and Table 9.3 and Figure 9.4 on page 49.
To order replacement parts, please contact:
Customer Support
Federal Signal Corporation
Phone: 1-800-264-3578
48
Table 9.2 Control pad replacement parts
Description
Slide Switch Assy., Control Pad
Bezel, Slide Switch
Knob, Aluminum, Slide Switch
Screw, #4-40 x 0.375", Flat Hd.,
Phil., Slide Switch Bezel
PA300-CN Siren Amplifier
Part Number
122290-01
8573060
85361185
7000259-06
Hide quick links:
Advertisement
Table of Contents
