Table 6.1 Control Pad Default Configuration - Federal Signal Corporation Smart Siren Installation And Maintenance Manual

Chapter 6: Setting Control Pad Options
Relay configurations in bold text are for the Four-Channel Relay Module, which is included with the
Model 69200 PA300-CN siren amplifier. Lightbar configurations in bold text are for lightbars equipped with
the designated hardware and software options.
Signal Warn
Master
Step-Through
Left, Right, Warning
Center Out Patterns
1 to 4
Rear
Lightbar Rear
Lightbar
Button 6 Button 7
Button Control: Button Control:
Exclusive Exclusive
Siren: Standby Siren: Radio
Slide Switch 1
Slide Switch 2
Button Control: Button Control:
Momentary Momentary
Lightbar Lightbar
Pattern 10 Pattern 17
Front Light Horn Ring
Cutoff Transfer
Relay 3 Relay 1
(10 A) ON (15 A) ON
Relay 3
(10 A) ON
40

Table 6.1 Control pad default configuration

Button 8 Button 9
Button Control: Button Control:
Push On/Off Exclusive
Lightbar:
Siren: Wail
Rear Light
Cutoff
Slide Switch 3 Button 1
Button Control: Button Control:
Progressive Push On/Off
Flash Take- Lightbar:
down/Alley Left Alley
Lightbar
Pattern 26
Siren
Dependent
Enabled
Horn Ring
Transfer
Relay 1
(15 A) ON
Relay 2
(20 A) ON
Relay 3
(10 A) ON
PA300-CN Siren Amplifier
Button 10 Button 11
Button Control: Button Control:
Exclusive Exclusive
Siren: Yelp Siren: Priority
Button 2 Button 3
Button Control: Button Control:
Push On/Off Push On/Off
Lightbar: Lightbar:
Takedowns Right Alley
Button 14 Button 15
Button Control: Button Control:
Push On/Off Push On/Off
Lightbar:
Lightbar:
Scene Light
Dimming
Button 12 Button 13
Button Control: Button Control:
Momentary Momentary
Siren: Manual Siren: Air Horn
Button 4 Button 5
Button Control: Button Control:
Timer: Security Timer:
8 Second 8 Seconds
Relay 4
Lightbar:
(10 A) ON
Intersection
Pattern 22
Horn Ring Park Detect
Button Control:
Momentary
Siren Mute
White Light
Cutoff