Connections For Radio Rebroadcast (Cable Assembly P/N 1461907); Figure 3.8 Connections For Radio Rebroadcast - Federal Signal Corporation Smart Siren Installation And Maintenance Manual

Chapter 3: Connecting the PA300-CN System

Connections for Radio Rebroadcast (Cable Assembly P/N 1461907)

The radio rebroadcast feature allows incoming two-way radio messages to be amplified by the
PA300-CN siren amplifier and rebroadcast over the siren speakers. For instructions on adjusting the
gain, see "Setting the Gain for Radio Rebroadcast" on page 30.
To wire the radio rebroadcast circuit:
1.
See Figure 3.9. Connect the brown 18 AWG two-conductor zip-cord across the speaker of the
two-way radio. Extend wiring with an 18 AWG lead or thicker.
2. Insulate spliced leads with butt-spliced wire connectors. Fold and seal unused leads.
22

Figure 3.8 Connections for radio rebroadcast

TWO-WAY
RADIO
PA300-CN Siren Amplifier
RADIO
SPEAKER
290A6793