Table of Contents
Advertisement
CHAPTER 6
Setting Control Pad Options
The PA300-CN control pad has these configurable features:
A notification beep that sounds every ten seconds when one or more functions or devices in the PA300-
◆
CN system, such as a lightbar, is activated. The default setting is "on."
Step-through selection of one of four levels of LED dimming, including "off." The default setting is at
◆
the brightest level.
The operation and control of network devices, which are can be reset to the factory-default configuration
◆
(see Table 6.1 on page 40 and the "Convergence Network Control Pad Configuration Software Manual,"
doc. no. 2562420).
To help you confirm your selection, the button you press glows while the control pad beeps every 10
seconds. See Figure 6.1 below and Figure 6.3 on page 41. Additionally, one or more amber LEDs turn on in
the row at the top of the control pad. These LEDs identify the button and its associated setting.
6
38
Figure 6.1 LEDs and buttons associated with Program Mode settings
Indicates that the Ethernet is on for system configuration and the control
pad is in Program Mode (see the "Convergence Network Control Pad
Configuration Software Manual," P/N 2562420)
Resets the control pad software to the factory default configuration
Dims and turns off the button LEDs
7
8
6
7
8
PA300-CN Siren Amplifier
Turns on and off the 10-second
function notification beep
Exits Program Mode
12
13
12
13
290A6785
Hide quick links:
Advertisement
Table of Contents
