Control Panel - Siruba ASP-EBJ100 Instruction Book

CONTROL PANEL

1. Setting Button
Item
① POWER Switch
② START (green)
③ Stop (yellow)
④ RESET (blue)
⑤ EMERGENCY (red)
⑥ LENGTH
⑦ RESUME
⑧ COUNTER
⑨ COUNT RESET
⑩ OVERLAP
※1: to set the consumption of under thread as a service reminder.
P4
⑤ ⑩
重疊量
LAPPING SIZE
② ③
Description
To turn on/off the power
1. To start the work cycle (Auto Mode) (p.14)
2. To start work cycle continuously. (p.15)
3. In Auto mode, to run one band circling move. (p.23)
1. To stop the machine. (p.15)
2. To complete one work cycle only (p.15)
1. To offset the error alarm.
2. Press for 3 seconds to reset the band starting position.
3. To control Presser Foot when only sewing machine works alone.
Press to stop the machine immediately for safety issue. Rotate the switch to release.
(p.15)
To set the length of the finished product (p.13)
To resume the work after threading interruption
1. To set the target production amount.
2. To count the number of production.
3. Applicable as counter for under thread. ※1
To reset the counter value to "0＂ . (p.21)
To set the overlapping area. Value "5＂ as reference position. (p.13, 16, 17, 18)
⑥ ⑦ ⑧
④
①
⑨