Siruba ASP-EBJ100 Instruction Book page 19

Part 2: Overlapping setting for
operation.
6. When band circling is ready
for sewing, the band´s left
end ⑦ and right end ⑧ should
align with the red line ⑩ on the
feeding plate ⑨ .
7. On the control panel, the
OVERLAPPING setting ⑪ refers
to how the 2 ends of the band
join together. In general, the
setting value "5＂ means 2
ends join even at the center red
line ⑫ .
8. To increase the overlapping
area, increase setting value of
OVERLAPPING ⑪ (max 9).
To decrease the overlapping area
or to widen the gap between 2
ends, decrease the value (min 1).
⑫
⑦ left end
⑪
重疊量
LAPPING SIZE
⑧ right end
⑨
⑩
P9