Auto Mode - Siruba ASP-EBJ100 Instruction Book

AUTO MODE

Part 1: Setting Sewing Pattern:
1. Turn on the power.
2. On the sewing machine control panel, press READY ① , and then the SEWING indicator ② goes off.
3. Press SELECT ③ to select PATTERN NO. ④ .
Press +/FORWARD ⑤ or -/BACKWARD ⑥ to select the pattern. Selection shown on the display ⑦ .
4. Press SELECT ③ to select Y-SCALE ⑧ .
Press +/FORWARD ⑤ or -/BACKWARD ⑥ to adjust the Y ratio. Selection shown on the display ⑦ . Adjust the
ratio according to the final output.
5. Press READY ① again, and then the SEWING ② should come ON.
②
①
P10
⑦
⑤ ⑥ ③
④
⑧