Renesas M30290T-EPB User Manual page 6

M30290T-EPB User's Manual
Terminology
Some specific words used in this user's manual are defined as follows:
PC7501 system
This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is configured with an
emulator main unit PC7501, emulation probe M30290T-EPB, emulator debugger M3T-PD30F and host machine.
Emulator main unit PC7501
This means an emulator for the M16C Family MCUs. You can configure your emulator system by changing emulation
probes according to your target MCU.
Emulation probe M30290T-EPB
This means the emulation probe (this product) for M16C/26A, 28, 29 Group MCUs. It is used with the emulator main
unit PC7501.
Emulator debugger M3T-PD30F
This means a software tool for the M16C/60 and M16C/Tiny Series. You can control the emulator from a host machine
through various interfaces.
Firmware
This means a program stored in the flash ROM of the emulator main unit PC7501. It analyzes contents of
communication with the emulator debugger and controls the emulator PC7501. This program is downloadable from the
emulator debugger to upgrade firmware or to support other MCUs.
Host machine
This means a personal computer used to control the PC7501 emulator system.
Target MCU
This means the microcomputer you are going to debug.
User system
This means a user's application system using the microcomputer to be debugged.
User program
This means a user's application program to be debugged.
Evaluation MCU
This means a microcomputer mounted on the emulation probe which is operated in the special mode for the emulator.
*
In this user's manual, this symbol is used to show active LOW. (e.g. RESET*)
( 6 / 58 )