Package Components; Other Tool Products Required For Development - Renesas M30290T-EPB User Manual

M30290T-EPB User's Manual

2.1 Package Components

The M30290T-EPB package consists of the following items. When unpacking it, check to see if your M30290T-EPB
contains all of these items.
Table 2.1 Package components
M30290T-EPB emulation probe
OSC-3 (20 MHz) oscillator circuit board
OSC-2 oscillator circuit bare board
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M30290T-EPB user's manual (this manual)
M30290T-EPB user's manual (Japanese)
* Please keep the M30290T-EPB's packing box and cushion material in your place for reuse at a later time when
sending your product for repair or other purposes. Always use these packing boxes and cushion material when
transporting this product.
* If there is any question or doubt about the packaged product, contact your local distributor.

2.2 Other Tool Products Required for Development

To bring forward programs development on M16C/26A, 28, 29 Group MCUs, the products listed below are necessary
in addition to those contained package above. Get them separately.
Table 2.2 Other tool products required for development
Product
Emulator main unit
Emulator debugger
42-pin 0.8-mm-pitch SSOP
(42P2R-E)
48-pin 0.5-mm-pitch LQFP
(48P6Q-A)
64-pin 0.5-mm-pitch LQFP
(64P6Q-A)
80-pin 0.5-mm-pitch LQFP
(80P6Q-A)
* To purchase these tool products, contact your local distributor.
Item
Product name
M3T-PD30F
M30263T-42SSB
(included with M30263T-EPB-FP)
M30260T-48FPD
(included with M30260T-EPB-GP)
M30291T-64FPD
(included with M30291T-EPB-HP)
M30290T-80FPD
(included with M30290T-EPB-HP)
Quantity
1
1
1
1
1
1
1
PC7501
Required according to a
foot pattern of a user system
( 18 / 58 )
Notes
Required
V.2.20 or later required