Specifications - Renesas M30290T-EPB User Manual

M30290T-EPB User's Manual

5.1 Specifications

Table 5.1 lists the specifications of the M30290T-EPB.
Table 5.1 Specifications of the M30290T-EPB
Emulator
Applicable MCU
Evaluation MCU
Usable MCU mode
Emulation memory
Maximum operating frequency
Clock oscillator
Operating frequency
Operating temperature
Storage temperature
Power supply to emulator
Connection to user system
(see 3.4 "Connecting the User
System" on page 31)
PC7501
M16C/26A, 28, 29 Group MCUs
M30290FCWP
ROM: 128 KB + 4 KB, RAM: 12 KB
Single-chip mode
(1) Internal flash ROM: 128 KB + 4 KB
(0F000h--0FFFFh, E0000h--FFFFFh, maximum operating frequency: 20
MHz, 0 wait)
* When "Disable the Internal Flash ROM" is checked in the MCU tab of the
emulator debugger's MCU Setting dialog box: 10 MHz, 0 wait.
(2) Internal RAM: 12 KB
(00400h--033FFh, maximum operating frequency: 20 MHz, 0 wait)
20 MHz (Operating voltage: 3.0 to 5.5 V)
10 MHz (Operating voltage: 2.7 to 5.5 V)
X -X (1 to 20 MHz):
IN OUT
Internal oscillator circuit board
Switchable to external oscillator input or internal generator circuit
X -X (32.768 kHz):
CIN COUT
Internal oscillator circuit
Switchable to external oscillator input
2.7 to 5.5 V
5 to 35°C (no dew)
-10 to 60°C (no dew)
Supplied from DC power supply of the emulator main unit
For 42-pin 0.8-mm-pitch SSOP (42P2R-E):
M30263T-42SSB (included with the M30263T-EPB-FP)
For 48-pin 0.5-mm-pitch LQFP (48P6Q-A):
M30260T-48FPD (included with the M30260T-EPB-GP)
For 64-pin 0.5-mm-pitch LQFP (64P6Q-A):
M30291T-64FPD (included with the M30291T-EPB-HP)
For 80-pin 0.5-mm-pitch LQFP (80P6Q-A):
M30290T-80FPD (included with the M30290T-EPB-HP)
( 44 / 58 )