Serial And Arinc Port Settings; Set Serial In" Command; Set Serial Out" Command - FreeFlight ADS-B FDL-978 Series Installation Manual

3.5.4.13.1 Serial and ARINC Port Settings

This section describes the configuration settings for serial and ARINC port functionality.
3.5.4.13.1.1

"set serial in" Command

This command sets the Serial Port Input configuration options. Help on this command is
displayed by entering "set serial in ?". Example "set serial in ?" output is displayed below:
Refer to Section 3.3.2.1 for information on selecting serial input settings.
87098-00 and 87098-10 Transceivers do not allow Serial Port 5 settings.
3.5.4.13.1.2

"set serial out" Command

This command sets the Serial Port Output configuration options. Help on this command is
displayed by entering "set serial out ?". Example "set serial out ?" output is displayed below:
FFS Copyright © 2015 All rights reserved.
ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev F
3-33