Ads" Command; Bit" Command; Comm" Command - FreeFlight ADS-B FDL-978 Series Installation Manual

ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev F

3.5.4.2 "ads" Command

This command displays the data from the Altitude/Air Data input interface.

3.5.4.3 "bit" Command

This command displays built-in-test information about the FDL-978 Series health. Example
output is displayed below:

3.5.4.4 "comm" Command

This command continually displays serial port communication status information:
enabled/disabled status and receive and transmit byte count and errors. The data is updated
once per second. Example output is displayed below:
Type the "stop" command to stop updating and return to the prompt.
3-28 FFS Copyright © 2015 All rights reserved.