Set Nacv" Command; Set Gps "Set Rx" Command - FreeFlight ADS-B FDL-978 Series Installation Manual

ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev F
3.5.4.13.2.4

"set nacv" Command

This command sets the Navigation Accuracy Category for velocity (NACv) for the GPS input.
Internal GPS should be set to 3 (auto). For external GPS units refer to the GPS manufacturer's
data for setting NACv. This should be set for both receivers and transceivers.
3.5.4.13.2.5

Set gps "set rx" Command

This command sets the receiver installed options to be transmitted by a Transceiver.
Transceivers should be set to 978 and no1090. It is not necessary to set this for a receiver only.
3-36 FFS Copyright © 2015 All rights reserved.