Regulatory Compliance; Led Safety; Emc; Rohs - Opticon OPI-3601 Specification Manual

12. Regulatory Compliance

12.1. LED Safety

IIEC 62471-1:2006 Exempt Risk Group

12.2. EMC

EN55022
EN55024
FCC Part 15 Subpart B Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept
any interference received, including interference that may cause undesired operation.
VCCI Class B
This is a Class B product, to be used in a domestic environment, based on the Technical
Requirement of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference.

13. RoHS

The OPI-3601 is compliant with RoHS.
RoHS: The restriction of the use of certain hazardous substances in electrical and electronic
equipment, 2002/95/EC

14. Reliability

MTBF (Mean Time Between Failures)
Note: The reliability of the OPI-3601 is guaranteed as far as it is operated under normal operating conditions in the
range of advised operating temperature and without excessive electrical or mechanical shock.

15. Precautions

Handle this product carefully. Do not deliberately subject it to any of the following.
(1) Shock
・Do not drop from the non-standard height.
・Do not swing around the cable.
・Do not place any heavy items on the scanner.
・Do not squeeze it between any heavy items.
(2) Temperature Conditions
・Do not use the scanner at temperatures outside the specified range.
・Do not pour boiling water on the scanner.
・Do not throw the scanner into the fire.
・Do not bend cables forcibly at low temperatures.
(3) Foreign Materials
・Do not put the scanner into water.
・Do not put the scanner into chemicals.
(4) Others
・Do not plug/unplug the connectors when the laser beam is emitted.
・Do not disassemble this product.
・Do not use the scanner near a radio or a TV receiver. It may cause reception problems.
・The scanner may be damaged by voltage drops caused by lightning.
・The scanner may not perform properly in environments when placed near a magnetic material.
47,480 hours
31
OPI-3601
Specifications Manual