Dräger Narkomed 2C Technical & Service Manual page 12

DIAGNOSTICS (continued)
2.2 Service Log
The Service Log Screen displays a tabular listing of each service event
including date, time, parameter, code and event description as shown in Figure
2-4.
To enter the Service Log screen from the Main Service Screen, highlight
SERVICE LOG (ref. Figure 2-3) with the selection wheel and press the trigger.
With SCROLL LOG highlighted, press the trigger to enable scrolling through
the list of service log entries with the selection wheel.
To obtain a printout of the service log (if you are in the Scroll mode, first
return to the selection mode by pressing the trigger), select PRINT LOG and
press the trigger to activate the printer.
Select EXIT and press the trigger to return the display to the Main Service
Screen.
SERVICE LOG
DATE TIME
11-01-92 10:26
11-01-92 10:30
11-02-92 07:30
11-13-92 09:44
Figure 2-4: SERVICE LOG
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
PARAMETER CODE DESCRIPTION
XXXXXXXX XXXX INSTALLATION
XXXXXXXX XXXX SOFTWARE STARTUP
XXXXXXXX XXXX O2 CAL
XXXXXXXX XXXX SOFTWARE STARTUP
2-4
RETURN TO CD-ROM TABLE OF CONTENTS
⇒
NM2C
SCROLL LOG
PRINT LOG
EXIT
SELECTS
FUNCTION
ACTIVATES
FUNCTION
Rev. A