Flowmeters - Dräger Narkomed 2C Technical & Service Manual

PMS PROCEDURE (continued)

6.15 FLOWMETERS

( ) 6.15.1 Oxygen Flowmeter
6.15.1.1
6.15.1.2
6.15.1.3
6.15.1.4
6.15.1.5
6.15.1.6
* 6.15.1.7
( ) 6.15.1.8
( ) 6.15.2 Nitrous Oxide Flowmeter
6.15.2.1
6.15.2.2
6.15.2.3
6.15.2.4
6.15.2.5
6.15.2.6
6.15.2.7
* These items do not apply to 2-gas machines or later design (P/N 4113329-001)
ORC.
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
Open the O cylinder valve.
2
Is it possible to adjust the flow of oxygen over the full range of the
flowmeters? ___ (Y)
Close the O cylinder valve and bleed the pressure.
2
Connect the O pipeline supply, and verify the operation of the
2
oxygen flowmeter.
Is the correct flow control knob and label attached to the oxygen
flow control valve? ___ (Y)
Close the oxygen flow control valve.
Set the Gas Selector switch to the O
What is the minimum flow of oxygen? ___ ml (100-200 ml/min);
(0 ml for 4107615A (Minimum O
Set the oxygen flow to 4 l/min.
Open the nitrous oxide cylinder valve.
Is it possible to adjust the flow of nitrous oxide over the full range
of the flowmeter? ___ (Y)
Close the nitrous oxide cylinder valve and bleed the pressure.
Connect the N O pipeline supply, and verify the proper operation
2
of the N O flowmeter.
2
Is the correct flow control knob and label attached to the N
control valve? ___ (Y)
Close the oxygen and nitrous oxide flow control valves.
6-34
RETURN TO CD-ROM TABLE OF CONTENTS
+ N O position.
2 2
Flow Elimination))
2
NM2C
O flow
2
Rev. K