166.07
.A02
MAIN FEATURES
2
2.3.4
MATERIALS THAT CAN BE HANDLED
PRODUCT SPECIFICATIONS
The machine can handle thermoplastic or aluminum caps whose dimensions have been previously arranged for
withSACMI's Engineering Dept. (See example in figure 2.3.4).
WARNING!
E0004P
The machine needs to be set up differently for each cap size, therefore special parts have to be used. Refer to the
"data sheet" provided by Sacmi.
PRODUCTION CAPACITY
Depends primarily on the type of caps handled and their dimensions
The maximum production output is given in paragraph 2.3.1 SPECIFICATIONS.
Figure 2.3.4 - PRODUCT SPECIFICATIONS
The dimensions stated in the figure below are for reference purposes only and are in no way binding
ALUMINUM CAPS
60
ø 40
ø 22
2 - 20
Revision 00 Date 18.10.1998
60
12
PLASTIC CAPS
ø 50
ø 22
12
T1148