Connecting And Hooking Up The Machine; Connecting The Machine To The Compressed Air Line; Connecting The Machine To The Cooling System - Sacmi BTA 900 Instruction Manual

4.3

CONNECTING AND HOOKING UP THE MACHINE

WARNING!
E0004P
The machine must be hooked up to the various systems exclusively by specialized persons according to the
directions provided by SACMI.
4.3.1

CONNECTING THE MACHINE TO THE COMPRESSED AIR LINE

(references in figure 4.3.1)
Connect the air preparation unit, fitted with snap-in coupling A located in the pneumatic control unit, to the
compressed air line by using a hose whose specifications meet those indicated in paragraph 2.3, TECHNICAL
CHARACTERISTICS.
4.3.2

CONNECTING THE MACHINE TO THE COOLING SYSTEM

(references in figure 4.3.1)
Attach the water mains and drain tubes to the corresponding delivery M and return R lines using bands. The
specifications of the tubes are given in paragraph 2.3, TECHNICAL CHARACTERISTICS.
Figure 4.3.1 - CONNECTING THE MACHINE TO THE
COMPRESSED AIR SUPPLY AND COOLING SYSTEM
A Compressed air supply
M Cooling system delivery line
R Cooling system return line
A
Revision 00 Date 18.10.1998
R
M
166.07
INSTALLATION
T1135
.A02
4
4 - 5