166.07
.A02
MAINTENANCE OPERATIONS
8
8.1
SCHEDULED MAINTENANCE
The machine does not require any particular type of maintenance.
CLEANING THE TOOLS
The fixed and movable tools must be cleaned at the intervals stated in the chart. Use the brass bristle brush provided
and jets of compressed air, if required.
The tools need to be cleaned to remove any dust that may build up while the caps are being processed.
WARNING!
E0004P
Pay special attention to both the fixed and movable knurling tools. Make sure they are perfectly clean. Make sure
fragments of material are not wedged between the movable and fixed cutters.
LUBRICATION
Lubrication of the various parts is extremely important. Accurate lubrication safeguards the machine against wear and
break down.
8 - 2
Revision 00 Date 18.10.1998