Lubricant Specifications - Sacmi BTA 900 Instruction Manual

166.07
.A02
MAIN FEATURES
2
2.3.5.2 Acoustic power level (ISO 3746)
Test conditions
- Operating conditions: run with load.
- Type of operation: plastic cap cutting
- Operating cycle: cap infeed and cutting
- Test environment: factory with reflecting flooring.
Instruments employed
Class 1 instruments (IEC 804)
Results
L = Surface acoustic radiation pressure in dB weighted A
pA
L = Acoustic power level in dB weighted A
wA
2.3.6

LUBRICANT SPECIFICATIONS

POINTS OF USE
A - Geared motor
D - Bearings
E - Cams and rollers
F - Gears
When selecting the lubricants, see the chart given on the LUBRICATION SHEET.
2 - 22
Revision 00 Date 18.10.1998
OIL
23°E - 50°C ISO 3498 - CO 320 (320 cSt. - 40°C)
GREASE
Dropping point < 200°C Worked penetration (0.1 mm) DIN 51804 = 265 - 295 dmm
Dropping point 200°C Worked penetration DIN 51804 = 300 dmm Dynamic Toughness
7000mPas
NLGI 1 DIN 51818 Dropping point ISO 2176 = 145°C Penetration ISO2137 = 310 - 340 dmm
89.2 dBA
108 dBA