General - Sacmi BTA 900 Instruction Manual

166.07
.A02
Revision 00 Date 18.10.1998
SAFETY EQUIPMENT AND PRECAUTIONS
3
3.2

GENERAL

WARNING!
E0004P
INSTALLATION
Install the machine by following the instructions provided by the Manufacturer and observing the safety regulations in
force in your country.
It is extremely important that the machine is properly connected to adequate earth electrodes. The Manufacturer shall
not be held responsible for any damage to the machine or injury to personnel resulting from improper installation.
SAFETY DEVICES & GUARDS
The machine comes equipped with electrical and/or mechanical safety devices which safeguard the machine and the
operator. The safety devices and guards provided MUST NOT be removed or inactivated under any circumstances.
The Manufacturer shall not be liable for any damage or injury if the machine operator fails to observe these precautions.
CHECKS, REPAIRS & MAINTENANCE
Do not perform any checks, repairs or maintenance operations on moving parts.
Use clearly visible signs to warn all personnel of possible danger. Before carrying out these operations, disconnect
the electricity supply by using the master switch.
The master switch is locked in the "off" position so that the machine cannot accidentally be started up.
To ensure overall machine efficiency and trouble-free operation, it is essential that the directions supplied by the
Manufacturer are followed and that the required maintenance is carried out.
It is advisable to periodically check all of the safety devices for proper functioning and the electrical cables for condition.
The latter must be replaced if damaged.
LIVE ELECTRICAL PARTS
Do not work on or near live electrical parts.
The electrical enclosure doors must be locked. Warning signs must be placed on them.
Before opening the electrical enclosures or switchboards, disconnect the electricity supply at the master switch.
QUALIFIED PERSONNEL
The assembling, disassembling and servicing of the machine must be performed by qualified personnel. When
carrying out these operations, always use adequate equipment and follow the instructions provided.
MACHINE NOT IN USE
If the machine is not going to be used for a long period of time, disconnect the power lead and apply all the required
safety devices.
3 - 3