Basler DGC-2020ES Configuration Instruction Manual page 153

9469200995
Connection Options
Connection options consist of the three selections described below. Refer to the Basler product
instruction manual for detailed connection information.
Always Prompt for Connection: When enabled, a dialog appears which provides connection options for
the appropriate type of device each time a connection attempt is made.
Ethernet Connection: When enabled, the BESTCOMSPlus Settings Loader Tool automatically attempts
to connect to the specified IP address before uploading settings.
USB Connection: When enabled, the BESTCOMSPlus
connect to the device via USB port before uploading settings.
Figure 16-4 illustrates the Connection Options tab.
General Operation
The steps listed below are provided as a general guideline for how to operate the BESTCOMSPlus
Settings Loader Tool when the initial setup is complete and the settings files are associated with bar
codes.
1. Power on the device which will receive the new settings. Ensure proper communication connections
have been made between the device and the PC running BESTCOMSPlus Settings Loader Tool.
2. Run BESTCOMSPlus Settings Loader Tool.
3. Place cursor in search bar.
DGC-2020ES
Figure 16-4. Configuration, Connection Options Tab
Settings Loader Tool automatically attempts to
®
BESTCOMSPlus Settings Loader Tool
16-5