Table of Contents
Advertisement
Chapter 6 Care and Maintenance
Maintaining the Device
Preliminary Procedure
If the ISO image has been received on a USB device or CD, proceed to the
"Firmware/Software Upgrade Procedure"
If the ISO image has been downloaded from a secured file exchange server, the ISO image
must be burned to a USB device or a CD.
NOTE
There are various tools and applications available to burn an ISO image to a USB
device or CD/DVD. This manual does not provide instructions for using these external
tools or applications. VIAVI recommends the following tool for burning ISO images to
USB devices: https://rufus.ie/.
Firmware/Software Upgrade Procedure
To ensure the latest version of software, contact customer service.
CMP system software/firmware are updated using the VIAVI Software Upgrade Tool. The
Software Upgrade tool is a software update package/application that will scan the CMP
system to determine which modules have updates available.
1
Connect the USB Device (or USB CD-ROM device) to one of the mA-3011 front
panel USB connectors.
USE OF USB to CD-ROM DEVICE
A Y-cable or dual USB connectors is required to draw enough current to power the
external CD-ROM device.
Connect external CD-ROM device to mA-3011 Embedded Host module, via a Y-Cable
or cable with 2 USB connectors.
If using a high-powered USB device, only use the top two mA-3011 USB connectors.
2
When the USB device is connected, the operating system displays a prompt. Review
the user prompt message and select the Run button to proceed.
Figure 6-1
3
After the upgrade is confirmed, the software upgrade tool window is displayed
(Figure 6-2).
Page 6-4
Auto-Run Dialog Box
mA-3011 AXIe Embedded Host Module Operation Guide
below.
Rev. C0
May 2020
Advertisement
Table of Contents
