Figure 3-2 Ma-3011 And Chassis Connection Diagram; Setup Module As Host Controller - Viavi mA-3011 Operation Manual

Chapter 3 Setup and Installation
Upon Receipt

Setup Module as Host Controller

To configure the mA-3011 as a Host Controller:
How to Setup as Host Controller
1 Complete Module Installation Procedure
2 Complete Chassis installation (refer to the mA-1302/mA-1305 AXIe Chassis
Operation Manual).
3 Connect an external monitor to the mA-3011 Display Port Connector.
4 Connect a USB Keyboard and USB Mouse to the mA-3011 USB Connectors.
Figure 3-2
5
Power on external monitor.
6 Power on Chassis. Wait while the module's operating system is initiated.
7
When the system is ready for use, the monitor updates to display the Host Module's
operating system.
The contents and appearance of the mA-3011's Operating System varies depending on
the software that has been installed on the module as well as the user settings. Figure 3-1
shows an example of how the mA-3011 OS screen may appear.
The method used to configure and operate the Chassis depends on the software
applications installed in the host controller. See
information about system operation.
Page 3-4
mA-3011 and Chassis Connection Diagram
mA-3011 AXIe Embedded Host Module Operation Guide
("Module Installation" on page
"Operation and Control" on page 4-1
3-3).
for
Rev. C0
May 2020