Table of Contents
Advertisement
Chapter 6 Care and Maintenance
Maintaining the Device
Maintaining the Device
The following procedures may be performed by the Operator. All other service must be
performed by Qualified Service Personnel.
CAUTION
This Device does not contain user serviceable parts. Servicing should only be performed
by Qualified Service Personnel.
Mise en Garde
Cet appareil ne contient pas de pièces pouvant être entretenues par l'utilisateur.
L'entretien doit seulement être effectué par du personnel de service qualifié.
Storing the Device
Module Installed in Chassis
To prepare the Chassis and module for long-term storage:
•
Disconnect all accessory cords from Front and Rear Panel Connectors.
•
Cover the connectors with suitable dust cover to prevent tarnishing of connector
contacts.
•
Refer to Chassis specifications for proper storage environment.
Module Removed from Chassis
To prepare the module for long-term storage:
•
Remove module from Chassis.
•
Place module in ESD protective packaging.
•
Refer to module specifications for proper storage environment.
Visual Inspections
Visual inspections should be performed periodically depending on operating environment,
maintenance and use.
•
Inspect connectors for dirt, dust, corrosion or rust.
•
Check the presence and condition of all warning labels and markings and supplied
safety information.
Page 6-2
mA-3011 AXIe Embedded Host Module Operation Guide
Rev. C0
May 2020
Advertisement
Table of Contents
