Table of Contents
Advertisement
External cleaning
The following procedure contains routine instructions for cleaning the exterior of the
module.
•
Remove grease, fungus and ground-in dirt from surfaces with soft lint-free cloth
dampened (not soaked) with isopropyl alcohol.
•
Remove dust and dirt from connectors with soft-bristled brush.
Firmware/Software Upgrades
The mA-3011 is shipped from the factory with the operating system installed in the module.
The version of the operating system installed in the mA-3011 at time of shipment has been
tested and verified to operate in the mA-3011 and AXIe Chassis. VIAVI does not
recommend updating the module's operating system unless the update is posted on the
CMP product web page.
Regular checks should be performed to ensure all system hardware contains the most
current software, drivers and or firmware.
Contact VIAVI Customer Service to check for the latest version of software, firmware
and/or drivers.
NOTE
The procedures in this section describe how to use the AXIe Web Browser UI to update
the mA-3011 operating system: refer to the mA-1302/mA-1305 AXIe Chassis Operation
Manual for instructions for updating Chassis software.
Firmware/Software Distribution Methods
Firmware and software update distribution methods vary based on the export classification
of the software as well as customer requirements. Firmware and software updates are
distributed in the form of an ISO image.
•
The ISO image may be distributed to customers on a USB device or CD.
•
An email may be sent to the end user with a link to download the ISO image from a
secure file exchange server.
NOTE
The distributed ISO image will contain the latest version of software and firmware for the
CMP system.
Rev. C0
April 2020
mA-3011 AXIe Embedded Host Module Operation Guide
Chapter 6 Care and Maintenance
Maintaining the Device
Page 6-3
Advertisement
Table of Contents
