Table of Contents
Advertisement
Operate in API mode
Remote AT Command Request frame - 0x17
Description
Used to query or set device parameters on a remote device. For parameter changes on the remote
device to take effect, you must apply changes, either by setting the Apply Changes options bit, or by
sending an AC command to the remote.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications.
Frame data
fields
Frame type
Frame ID
64-bit
destination
address
16-bit
destination
address
AT command
Command
parameter
XBee3® 802.15.4 RF Module User Guide
Offset Description
3
0x17
Identifies the data frame for the host to correlate with a subsequent
4
response (0x97). If set to 0, the device does not send a response.
Broadcast = 0x000000000000FFFF. This field is ignored if the 16-bit
5-12
network address field equals anything other than 0xFFFF.
Set to match the 16-bit network address of the destination, MSB first, LSB
13-14
last. Set to 0xFFFF if 64-bit addressing is being used.
Command name: two ASCII characters that identify the command.
16-17
18-n
If present, indicates the parameter value you request for a given register.
If no characters are present, it queries the register.
Frame descriptions
API frame
70
Advertisement
Table of Contents
