1St If Rejection; 2Nd If Rejection - Rohde & Schwarz FSP3 Service Manual

Performance Test

1st IF Rejection

Additional signal generator
settings:
Additional R&S FSP settings:
Measurement:
Evaluation:

2nd IF Rejection

Additional signal generator
settings:
Additional R&S FSP settings:
Measurement:
Evaluation:
1164.4556.82
- Frequency 3476.4 MHz
- [ FREQ : CENTER : {f
in
Refer to "Performance Test Report" table for values of f
Set marker to peak of signal:
- [ MKR : PEAK ]
The IF rejection is the difference between the output level of the signal
generator and the level reading of marker 1 (L
IF rejection = –10 dBm – L
- Frequency 404.4 MHz
- [ FREQ : CENTER : {f
in
Refer to "Performance Test Report" table for values of f
Set marker to peak of signal:
- [ MKR : PEAK ]
The IF rejection is the difference between the output level of the signal
generator and the level reading of marker 1 (L
IF rejection = –10 dBm – L
1.6
} ]
dis
dis
} ]
dis
dis
R&S FSP
.
in
):
.
in
):
E-1