Displayport And Dvi; Lan Connector; Usb Ports; If / Video / Demod Output - Rohde & Schwarz ESW Series User Manual

®
R&S ESW

5.2.3 DisplayPort and DVI

You can connect an external monitor or other display device to the R&S ESW. Another
display device allows you to view the user interface on a bigger screen. Two different
types of connectors are provided for this purpose:
●
DisplayPort
●
DVI (Digital Visual Interface)
For details see

5.2.4 LAN Connector

The LAN interface allows you to connect the R&S ESW to a local network for remote
control, printouts or data transfer. The assignment of the RJ-45 connector supports
twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded twisted pair, and STP for shielded twisted pair).
For details see

5.2.5 USB Ports

The four USB ports on the rear panel (type A) allow you to connect devices like key-
boards, mouses or memory sticks.
The male USB connector (type B) allows you to connect the R&S ESW to a computer
and establish a remote control connection, for example.
All USB connectors support standard 2.0.

5.2.6 IF / Video / Demod Output

The two female BNC connectors can be used for various outputs:
●
Output of the intermediate frequency (IF)
●
Output of the video signal
●
Output of the demodulated signal (AM, FM)
Details about configuring the output type and characteristics are part of the user man-
ual.

5.2.7 Sync Trigger Input and Output

The "Sync Trigger Input / Output" connectors allow you to synchronize several devices
(for example two R&S ESWs) with respect to the trigger signal, but also the reference
frequency. A 100 MHz signal can be output as a trigger or reference signal to another
device, and an external trigger or reference signal can be received at the input connec-
tor by the R&S ESW.
User Manual 1177.6298.02 ─ 08
Chapter 4.4, "Connecting an External
Chapter 14, "Network and Remote
Instrument Tour
The Rear Panel
Monitor", on page 33.
Operation", on page 356.
54