Rohde & Schwarz FSP3 Service Manual page 25

Service and Repair
Contents of Manuals for Spectrum Analyzer R&S FSP
Service Manual - Instrument
The service manual - instrument informs on how to check compliance with rated specifications, on
instrument function, repair, troubleshooting and fault elimination. It contains all information required
for repairing the R&S FSP by the replacement of modules.
The service manual comprises four chapters and an annex (chapter 5) containing the R&S FSP circuit
documentation:
Chapter 1 provides all the information necessary to check for compliance with rated specifi-
cations. The required test equipment is included, too.
Chapter 2 describes the manual adjustment of the calibration source and of the frequency
accuracy as well as the automatic adjustment of individual module data following
module replacement.
Chapter 3 describes the design as well as simple measures for repair and fault
diagnosis, in particular, the replacement of modules.
Chapter 4 contains information on the extension and modification by installing
instrument software and retrofitting options.
Chapter 5 describes the shipping of the instrument and ordering of spare parts and contains
spare parts lists and exploded views.
Operating Manual
In the operating manual you will find information about the technical specifications, the controls and
connectors on the front and rear panel, necessary steps for putting the instrument into operation, the
basic operating concept, manual and remote control.
For introduction typical measurement tasks are explained in detail using the functions of the user in-
terface and program examples.
The operating manual
diagnosis by means of warnings and error messages output by the unit.
1164.4556.82
further provides hints
0.1
on preventive maintenance
R&S FSP
and fault
E-2