Rohde & Schwarz FSP3 Service Manual page 177

R&S FSP
Normal action
After this test, the BIOS has been loaded and the operating system
is started.
After Windows XP was installed correctly, the following selection
menu is displayed:
Please select the operating system to start:
Analyzer Firmware
Analyzer Firmware Backup
Use the up and down arrow keys to move the highlight to your
choice.
Press ENTER to choose.
Seconds until highlighted choice will be started automatically: 0
For troubleshooting and advanced startup options for Windows,
press F8.
1164.4556.82
Error and error cause
The message „No System Disk
or Disk error ..." at this point
indicates that the contents of the
hard
Replace the hard disk.
After Windows XP was installed
correctly, the following selection
menu is displayed:
3.73
Troubleshooting
disk are not correct.
E-1