Rohde & Schwarz FSP3 Service Manual page 5

Rohde & Schwarz makes every effort to keep the safety standard of its products up to date and to offer
its customers the highest possible degree of safety. Our products and the auxiliary equipment required
for them are designed and tested in accordance with the relevant safety standards. Compliance with
these standards is continuously monitored by our quality assurance system. This product has been
designed and tested in accordance with the EC Certificate of Conformity and has left the manufacturer's
plant in a condition fully complying with safety standards. To maintain this condition and to ensure safe
operation, observe all instructions and warnings provided in this manual. If you have any questions
regarding these safety instructions, Rohde & Schwarz will be happy to answer them.
Furthermore, it is your responsibility to use the product in an appropriate manner. This product is
designed for use solely in industrial and laboratory environments or in the field and must not be used in
any way that may cause personal injury or property damage. You are responsible if the product is used
for an intention other than its designated purpose or in disregard of the manufacturer's instructions. The
manufacturer shall assume no responsibility for such use of the product.
The product is used for its designated purpose if it is used in accordance with its operating manual and
within its performance limits (see data sheet, documentation, the following safety instructions). Using
the products requires technical skills and knowledge of English. It is therefore essential that the
products be used exclusively by skilled and specialized staff or thoroughly trained personnel with the
required skills. If personal safety gear is required for using Rohde & Schwarz products, this will be
indicated at the appropriate place in the product documentation.
Observe Weight
operating indication for
instructions units >18 kg
Supply
voltage
ON/OFF
1171.0000.42-02.00
Before putting the product into operation for
the first time, make sure to read the following
S a f e t y I n s t r u c t i o n s
Symbols and safety labels
Danger of Warning!
electric Hot
shock surface
Direct
Standby
current
indication
(DC)
PE terminal Ground
Alternating Direct/alternating
current (AC) current (DC/AC)
Attention!
Ground Electrostatic
terminal sensitive
devices
Device fully
protected by
double/reinforced
insulation
Sheet 1