Rohde & Schwarz FSP3 Service Manual page 201

R&S FSP
Installing the Options
The following options are available with the R&S FSP:
AF Demodulator
OCXO Reference
TV Trigger / RF Power Trigger
Tracking Generator
External Generator Control
WCDMA Demodulation Hardware
LAN Interface
Removable Hard Disk
Flash Disk
Externer Mischer (nur für R&S FSP 40)
Elektronic Attenuator
Trigger Port
DC Power Supply
Battery Pack
Additional Battery Pack
Demodulation Hardware
For retrofitting, please note the mounting instructions enclosed with the options.
These mounting instructions can be filed at this place in the service manual and are thus easily available
whenever they are required.
CAUTION
Disconnect the instrument from the mains before opening the casing. Also note the
safety instructions at the beginning of this manual.
The components used in the instrument are sensitive to electrostatic discharges
which is why they are to be dealt with according to the ESD regulations
When installing hardware options note the following:
Switch off instrument and pull the mains plug.
Unscrew the 4 rear-panel feet (450) and push the tube (410) backwards and take off.
After installing the option replace the tube and fasten the rear panel feet again.
CAUTION
When replacing the tube take care not to damage or pull off cables
1164.4556.82
R&S FSP-B3
R&S FSP-B4
R&S FSP-B6
R&S FSP-B9
R&S FSP-B10
R&S FSP-B15
R&S FSP-B16
R&S FSP-B18
R&S FSP-B20
R&S FSP-B21
R&S FSP-B25
R&S FSP-B28
R&S FSP-B30
R&S FSP-B31
R&S FSP-B32
R&S FSP-B70
4.3
Installing the Options
1129.6491.02
1129.6740.02
1129.8594.02
1129.6991.02
1129.7246.03
1155.1006.02
1129.8042.02
1163.0892.03
1155.1606.10
1155.1758.02
1129.7746.02
1162.9915.02
1155.1158.02
1155.1258.02
1155.1506.02
1157.0559.02
E-1