Chapter 2 Introduction; Introduction; Preparing For Installation - Raven SmarTrax Installation Manual

Case ih steiger and new holland t9.xxx - steering ready, model year 2016 & newer

Hide thumbs Also See for SmarTrax:

Table of Contents

I NTRODUCTION

CHAPTER

C H A P T E R 2

Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge,

hands-free steering of the machine via Global Positioning System (GPS) coordinates.

This manual applies to the following machines:

MAKE: Case IH

MODEL: Steiger - Steering Ready

YEAR: 2016 & Newer

MAKE: New Holland

MODEL: T9.XXX - Steering Ready, Serial Number ZFF403001 & Higher Only

YEAR: 2016 & Newer

NOTE:

New Holland models with a lower serial number uses kit P/N 117-5032-002.

FIGURE 1. Case IH Steiger Quadtrac535

Before installing SmarTrax, park the machine where the ground is level, clean, and dry. Leave the machine turned

off for the duration of the installation process.

During the installation process, follow good safety practices. Be sure to carefully read the instructions in this

manual as you complete the installation process.

P/N 016-5032-044 Rev. A

Table of Contents