Raven SmarTrax Installation Manual page 14

C 3
HAPTER
FIGURE 3. Removing Instructional Seat Molding
4. Remove the plastic molding under the instructional seat by removing the nuts and bolts that secure it.
FIGURE 4. Node Mounted to Mounting Bracket
5. Mount the node (P/N 063-0173-228) to the node mounting plate (P/N 107-0172-084) using three 3/8"-16 lock
nuts (P/N 312-4000-061).
6. Place the node in the instructional seat compartment so the connectors face the door.
7. Secure the node mounting plate to the existing bolts in the floor of the cab using four 1/4" split lock washers
(P/N 313-1000-016), four 1/4" flat washers (P/N 313-2300-009), and four M6 lock nuts (P/N 312-4000-207).
10
Case IH Steiger and New Holland T9.XXX - Steering Ready, Model Year 2016 & Newer SmarTrax™ Installation Manual
Plastic
Molding