Raven SmarTrax Installation Manual page 15
Case ih steiger and new holland t9.xxx - steering ready, model year 2016 & newer
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
FIGURE 5. Node Cable Installed on Node
8. Install the two large, rectangular connectors of the node harness into the correct ports of the node, tightening
the bolts on the connectors to secure the connections.
NOTE:
The connectors should be facing the window.
9. Route the node harness into the instructional seat.
FIGURE 6. Node Harness Connection
10. Connect the 40-pin connector of the node harness to the machine's mating 40-pin connector.
P/N 016-5032-044 Rev. A
CAB COMPONENT INSTALLATION
11
Advertisement
Table of Contents
