Raven SmarTrax Installation Manual page 31

Case ih patriot 4440, non-steer ready my 17 and newer

Hide thumbs Also See for SmarTrax:

Table of Contents

FIGURE 16. Node Harness Installed on Node

1. Install the two large, rectangular connectors of the node harness (P/N 115-4001-191) into the correct ports of

the node, tightening the bolts on the harness connectors to secure the connections.

FIGURE 17. Node Harness Routing

2. Route the node harness into the blower fan compartment located in the right-rear corner of the cab.

FIGURE 18. Convenience Tray Removed

3. Remove the convenience tray from the right-rear corner of the cab.

P/N 016-5032-043 Rev. A

Cab Component Installation:

Table of Contents