C
4
HAPTER
MOUNT THE SMARTRAX NODE - SECONDARY MOUNTING METHOD
FIGURE 10. Node Mounting Location
1. Identify the node mounting location on the bracket right side of the operator's seat.
2. Remove the existing nut, bolt, and spacer from the bracket that holds the machine's traction control foot pedal
in place.
FIGURE 11. Hole Drilled in Machine's Bracket
3. Align the hole in the node mounting bracket (P/N 107-0171-954) with the hole in the machine's bracket.
4. Using the node mounting bracket as a template, drill a second hole in the machine's bracket.
24
Case IH Patriot 4440, Non-Steer Ready MY 17 and Newer SmarTrax Installation Manual