Raven SmarTrax Installation Manual page 29

Case ih patriot 4440, non-steer ready my 17 and newer

Hide thumbs Also See for SmarTrax:

Table of Contents

FIGURE 12. Node Mounting Bracket Installed

5. Reinstall the machine's spacer between the traction control pedal and the machine's bracket.

6. Secure the node mounting bracket to the machine's bracket using two 1/4"-20 x 1-1/4" hex bolts (P/N 311-0050-

106), two 1/4" flat washers (P/N 313-2300-009), and two 1/4"-20 nylon insert lock nuts (P/N 312-4000-057).

FIGURE 13. Node Installed on Mounting Bracket

7. Align the holes in the node with the holes in the node mounting bracket.

8. Install two 5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and two 5/16" zinc flanged lock nuts (P/N 312-1001-169)

in the top and right node mounting tabs.

P/N 016-5032-043 Rev. A

Cab Component Installation:

Table of Contents